Product Details:
Minimum Order Quantity | 1 Unit |
Usage/Application | Clinical |
Voltage | 100-240 VAC |
Entire Weight | 1.53 Kg |
Ramp | 0-45 min |
Pressure Range | 4 to 20 cmH20 |
Automation Grade | Manual |
Warranty | 2 Years |
Frequency | 50/60 Hz |
Brand | Philips |
Data Storage Capacity | 1 years |
Dimensions | 7 x L x 5.5 x 4 inch ( L x W x H ) |
This CPAP device reflects the proven quality of Philips in a cost-saving design. Quiet operation, easy-to-use interface, and optional humidifier help assure a satisfying patient experience.The Dorma 100 delivers practical sleep apnea therapy with the proven quality of Philips. The onboard display shows 7 & 30 day averages as well as total therapy hours. An optional humidifier extends the capabilities for enhanced patient comfort.Bold, graphic display icons provide easy-to-understand operational control. The universality of this icon-based interface helps assure access for broad acceptance and compliance.
Product Details:
Minimum Order Quantity | 1 Piece |
Model | R218P12 |
Brand | Maxtec |
Measurement Range | 0.0 - 99.9% oxygen (gas) |
Battery Life | Approximately 1850 hours (74,000 cycles) |
Operating Temperature | 15 deg to 40 deg C |
Storage Temperature | -15 deg to 50 deg C |
Weight | 85 grams Approx |
Diverter Fitting | Fits medical standard 15mm "T" adapter |
Product Details:
Minimum Order Quantity | 30 Unit |
Temperature | 5 deg C 40 deg C |
Relative Humidity | 15 - 95 % |
Atmospheric Pressure | 110 to 60 kPa |
Circuit Types | Active with PAP; passive |
Ventilation Types | Volume control; pressure control; bilevel |
Pressure Modes | CPAP; S; S/T; T; PC-SIMV (w/PS) |
IPAP | 4 to 50 cm HO |
EPAP for Active Circuits | 0 to 25 cm HO |
EPAP for Passive Circuits | 4 to 50 cm HO |
CPAP for Passive Circuits | 4 to 20 cm HO |
PEEP for Active Circuits | 0 to 25 cm HO |
PEEP for Passive Circuits | 4 to 25 cm HO |
Pressure Support Differential | 0 to 30 cm HO |
Part Number for this product is 1054096
Avoid purchasing Part no starting with DS as unauthorised person must be selling that and that will not have warranty in India as confirmed By Philips Respironics itself.
Warranty of 2 years can be availed with authorised channel partner like MediKart Healthcare only. plesae ensure to ask for the warranty card.
Please look for the Philips Respironics authorisation certificate to ensure genuine & authentic product purchase.
Philips Respironics Trilogy 100 system provides continuous or intermittent ventilatory support for the care of individuals who require mechanical ventilation. Trilogy 100 provides both pressure control and volume modes of therapy. the device can provide non-invasive or invasive ventilation. It can be used to provide total therapy to patients as they progress from non-invasive to invasive ventilation. the ventilator can be operated using several different power sources, including an internal Lithium-Ion battery. The device provides Pressure Control Ventilation (PCV) and Volume Control Ventilation (VCV) for non-invasive and invasive patients.
Product Details:
Minimum Order Quantity | 1 Unit |
Model Name/Number | Philips Respironics Trilogy EVO Ventilator witrh OBM - O2 VENTILLATOR PART NUMBER= IA2100X15B |
Patient Age Group | Adult, Paediatric, Neonatal |
Tidal Volume | AVAPS-Auto EPAP mode automatically adjusts pressure support,to maintain the target tidal volume,an |
Ventilation Modes | Pressure - CPAP,S/T,PSV,A/C-PC,SIMV-PC,AVAPS-AE Vol,A/C-VC,SIMV-VC MPV settings - MPV-PC,MPV-VC |
Respiratory Rate | 0-90 BPM Static Compliance of respiratory system (lungs + chest wall),measured dynamically. |
Plateau Pressure | Plateau % is 0 -100% -max pressure applied small airways & alveoli during +ve-pressure mech ventil |
Mounting Type | Portable |
Touch Screen Present | yes |
Specifications
Ventilation modesA/C-PC |
|
---|---|
A/C-VC |
|
CPAP |
|
PSV |
|
S/T |
|
SIMV-PC |
|
SIMV-VC |
|
MPV-PC |
|
MPV-VC |
|
Weight |
|
---|---|
Size |
|
Screen dimensions |
|
Low flow |
|
---|---|
High pressure |
|
Additional Information:
Product Details:
Brand | Wisp |
Size | Small,Medium and Large |
Faceplate | Polycarbonate |
Feature | Lightweight & comfortable |
Packaging Type | Box |
Product Details:
Material | ABS Plastic |
Usage | Hospital, Clinic |
Size | S, M, L |
Brand | Philips |
Packaging Type | Box |
Product Details:
Mask Securing Method | Head Band |
Features | Reusable |
Usage | Clinic, Hospital |
Material | ABS Plastic |
Product Details:
Brand | Philips |
Type | Breathing Apparatus |
Material | Silicone |
Application | Hospital |
Product Details:
Application | Clinical Purpose, Hospital |
Weight | 1.36 Kg |
Rise Time | 1-4 levels(200-500ms) |
Respiratory Rate | 5-30 BPM Settable |
Ramp Time | 0 to 45 min |
Modes | CPAP, S, ST, PC, T |
Bi Flex | Available on S mode |
Timed inspiration | 0.5 to 3.0 seconds |
IPAP | 4 to 25 cm H2O |
EPAP | 4 to 25 cm H2O |
CPAP | 4 to 20 cm H2O |
Ramp | 0 to 45 minute |
Breath Rate | 0 to 30 BPM |
Target Tidal volume | 200 to 1500 ml |
Temperature | 5 deg C to 35 deg C (41 deg F to 95 deg F) |
Relative Humidity | 15 to 95% (non-condensing) |
This humidifier offers three levels of humidification (70, 80 or 90 percent) and the heated tube has five levels of temperature available, ranging from 4 to 16 degrees above the room temperature. These two features work together to deliver the optimum humidification level at the mask.
PR's Dry Box Technology is designed to trap water in the humidifier where it belongs, keeping it away from the machine. The one way valve on the air outlet port further guards against water exiting the humidifier.
The movement of CPAP air through the air passages can dry out the airway. Humidifiers add moisture to the airstream to help reduce irritation to the nasal passages. Not only are dry air passages uncomfortable, but the swelling can actually narrow the airway affecting therapy pressure requirements.
Humidification is the comfort feature most commonly added to CPAP therapy. There are two kinds of humidifiers: cool passover and heated. A cool passover humidifier passes room temperature air over a chamber of room temperature water. A heated humidifier heats water to warm it and as the airstream passes over the heated water, it picks up the moisture and warms the air. The heated air is able to hold enough moisture to maintain a comfortable airway.
Product Details:
Warranty | 30 Days |
Weight | 6 oz |
DC Power | 12 V |
Length | 6 Feet Cord |
FAA Approved | Yes |
Mode of Operation | DC Power Cord |
Latex Free | Yes |
The 6ft 12V DC Power Cord by Respironics is designed to power a DreamStation™ CPAP or BiPAP™ Machine by plugging into a 12V cigarette lighter or any DC power source. The DC power cord is ideal for the user who travels to remote places with a CPAP or BiPAP™ machine with no electrical power. The DC power cord allows the machine to be powered by a vehicle's DC outlet or alternate DC power source. The DC power cord can connect to a Battery Cable with Clips (NOT INCLUDED) to allow the user to power a machine by using an external battery with positive and negative terminals. If using a battery, it is recommended to use a battery that is not needed for any other reasons that to power the machine. A deep cycle marine battery should be used as it will provide a longer usage time.
Optional Accessories:
Product Details:
Brand | Philips |
Material | Plastic |
Packaging Type | Box |
Size | Small,Medium |
Application | Clinical,Hospital |
Product Details:
Material | ABS Plastic |
Size | Small |
Packaging Type | Box |
Shape | Triangle |
Application | Clinical,Hospital |
Respironics has improved the Full Face Mask Cushion. The gel is now softer and conforms to your face with greater ease. Use the separate silicone membrane that snaps on, over the gel cushion, to increase the life of the cushion and provides a unique Sure Seal Technology (SST), contouring a seal around the Gel Cushion.
Product Details:
Type | Respiratory |
Size | Medium, Large |
Usage/Application | Hospital |
Brand | Philips |
Material | Silicon |
Product Details:
Usage | Clinic, Hospital |
Ramp | 0-20 min |
Length | 182 cm |
Packaging Type | Box |
Material | Plastic |
Oxygen pipe transfers oxygen from the Oxygen Collector to an Oxygen Distributor, Oxygen Compressor, or Oxygen Sealer. You simply place the oxygen pipe on the collector, and trail it to any of the input sides of the oxygen machines.
Product Details:
Minimum Order Quantity | 1 Piece |
Material | Silicone |
Filling Material | Plastic |
Brand | Philips Respironics |
Outer Material | Latex |
Application | Clinical, Hospital |
The Gel Nasal Pillows Cushion on the Respironics Nuance Nasal Pillow CPAP Mask will allow the pillow mask user to experience comfort in a whole new way during CPAP therapy. Feel the comfort and get the seal in the mask. The secret to the comfort is found within the gel which contours to the nose better than standard nasal pillow CPAP masks on the market. By contouring to the nose, there are fewer leaks and fewer restless nights. With the Respironics Nuance gel pillows mask lessens the discomfort and irritation CPAP users have found in the leading pillows masks.
Product Details:
Usage | Hospital, Clinic |
Material | Plastic |
Capacity | 2.5 ltr |
Power | 30 W |
Product Details:
Brand | Philips |
Material | Plastic |
Packaging Type | Box |
Application | Clinical, Hospital |
Product Details:
Brand | Philips Respironics |
Product Code | SARA91 |
Product Brand | Philips Respironics |
Product Code | SARA91 |
Availability | 10 |
Category | CPAP Supplies & Related Accessories |
Product Brand | Philips Respironics |
Product Code | HT15 |
Availability | 10 |
Category | CPAP Supplies & Related Accessories |
Product Details:
Material | ABS Plastic |
Usage | Clinic, Hospital |
Feature | Reusable |
Packaging Type | Box |
4.3/5
Rated by 31 Users